Supplies

Prototyping Supplies

Examples of some of the low fidelity prototyping supplies the OEDK may have in stock include: Pipe Cleaners, Stick Notes, Foam Letters, Rubber Bands, Clothespin, Beads, Foam blocks, Plastalina Modeling Clay, Scissors, Brushes, K'nex, Felt Sheets, Styrofoam Balls, Wood Craft Sticks, Safety Pins, Flexible Magnets, Index Cards, Colored Straws, Thin Dowels, Plastic Canvas, and Modeling Compound.

Electronics

We have a wide array of electronics including resistors, capacitors, and voltage regulators.

   Located in Electronics Lab

Machine Screws*

We have Round, Oval, Flat, and Socket Head Machine screws from 0-80 to 1/4-20. We also have nuts for each of these. 

These screws are located in the machine shop. If you need a screw, remove the drawer to get the screw, but Please DO NOT take the drawer with you.

   Located outside of Machine Shop

Wood Screws

Wood screws are located in the green cabinets outside of the machine shop, and are of varying sizes. 

   Located outside of Machine Shop

Bolts

We have Carriage and Hex bolts. They are located in the green cabinets outside of the machine shop, in varying sizes. 

   Located outside of Machine Shop

*NOTE: We do not have metric screws. Go to Southland  for them.